Molykote 55 O-ring grease, 100gr
Kysy hintaa!!!
Avaa galleria klikkaamalla
Ilmainen toimitus
Jos ostoksesi ylittää € 40,00, on kuljetus Viro sisällä meidän kustannuksellamme (Omniva ja SmartPOST).
- Katsottu: 3071
-
Näytä lisää tuotteita samalta valmistajalta
- Tuotenumero: Molykote 55 O-ring grease, 100gr
- Saatavuus: Kysy hintaa!!!
- €0.00
- Veroton: €0.00
Molykote 55 O-ring grease
Silicone based grease for O-rings
APPLICATIONS
Lubrication between rubber and metal parts in pneumatic systems in aircraft, automotive and general industrial applications
TYPICAL PROPERTIES
Specification Writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales office or your Global
Dow Corning Connection before writing specifications on this product.
Test Property Unit Result
Color Off-white
NLGI consistency class approx. 2
ASTM D 217 Worked Penetration mm/10 290
ISO 2811 Density at 20°C (68°F) g/cm^3 0.98
DIN 51 562 Base oil viscosity at 25°C (77°F) mm2/s 100
Service temperature °C -65 TO +175 °F -85 TO +347
ASTM D 566 Drop point °C 220 °F 428
ASTM D147880 Low temperature torque test at -65°C (-85°F)
Initial break-away torque Nm 325x10-3
Torque after 20 minutes running time Nm 35x10-3
Coefficient of friction
Steel ball against plastic surface (POM) Ø ball = 12.7mm, load = 6.3N, v =10 mm/s, 24h, μ= 0.03
Resistance
DIN 51 808 Oxidation resistance, pressure drop 100h, 99°C (210°F) bar 0.1
Corrosion protection
DIN 51 802 SKF-Emcor method - degree of corrosion 0
FED Std 791 Bleed, 24h at 150°C (302°F) % 3.0
Evaporation, 24h at 150°C (302°F) % 1.4
ASTM D 1264 Water washout resistance % 4.2
ASTM: American Society for Testing and Materials.
ISO: International Standardization Organization.
DIN: Deutsche