Motul 300V Factory Line 4T Road Racing 10W-40, 4L
2-5 Päivää
Avaa galleria klikkaamalla
Ilmainen toimitus
Jos ostoksesi ylittää € 40,00, on kuljetus Viro sisällä meidän kustannuksellamme (Omniva ja SmartPOST).
- Katsottu: 2806
-
Näytä lisää tuotteita samalta valmistajalta
- Tuotenumero: Motul 300V Factory Line 4T Road Racing 10W-40, 4L
- Saatavuus: 2-5 Päivää
- €78.62
- Veroton: €64.44
Motul 300V Factory Line 4T Road Racing 10W-40
Racing Motorcycle Lubricant
100% Synthetic - E Technology
TYPE OF USE
Race bikes fitted with high performance 4 stroke engines, integrated gearbox or not, wet or dry clutch, race engines, qualifying engines designed to run low viscosity oil: speed bikes, MotoGP, SuperSport, Superbike, uphill, hill climb …
Other uses: street bikes fitted with catalytic converters, ATV’s, UTV’s…
PERFORMANCE
STANDARDS Above existing standards
Wet clutch compatibility checked on JASO T903 test.
E TECHNOLOGY
For decades MOTUL has developed high performance synthetic Ester based lubricants.
By selecting esters over other high performance synthetic base stocks and combining them with an innovative additive package, MOTUL has created a perfect synergy.
This most advanced E Technology allows maximum power output of the engine without compromising reliability and wear.
- Up to 1.3% horsepower increase while maintaining wet clutch performance.
Outstanding gearbox protection: Thanks to the innovative anti-wear additives package. FZG Gear Test results: Pass FLS>14. The FZG (Forschungsstelle für Zahnrader und Getriebebau) Test, evaluates
fluid lubricating and wear protection properties at the interface of a loaded set of gears. Lubricants are then graded based on their “Failure Load Stage” or FLS rating from FLS 1 (very poor result) up to FLS 14 (outstanding result).
- Stable oil pressure whatever running conditions.
RECOMMENDATIONS
For optimum engine and gearbox performance, avoid mixing with other synthetic or mineral lubricants.
Oil change: according to your own use.
PROPERTIES
Color Visual Yellow / Green Fluo
Viscosity grade SAE J 300 10W-40
Density at 20°C (68°F) ASTM D1298 0.852
Viscosity at 40°C (104°F) ASTM D445 82.1 mm²/s
Viscosity at 100°C (212°F) ASTM D445 13.1 mm²/s
Viscosity Index ASTM D2270 160
Pour point ASTM D97 -36°C / -32.8°F
Flash point ASTM D92 250°C / 482°F
TBN ASTM D2896 8.3 mg KOH/g
