Liqui Moly Engine Flush, 300ml

2-5 Päivää

Avaa galleria klikkaamalla

Ilmainen toimitus

Jos ostoksesi ylittää € 40,00, on kuljetus Viro sisällä meidän kustannuksellamme (Omniva ja SmartPOST).

Katsottu: 6684
Näytä lisää tuotteita samalta valmistajalta
Tuotenumero: SKU-17800
Saatavuus: 2-5 Päivää

€8.38
Veroton: €6.87

Määrä

Lisää toivelistaan Vertaa tätä tuotetta

0 arvostelua / Kirjoita arvostelu

Kuvaus
Arvostelut (0)

Liqui Moly Engine Flush

Product details

Engine Flush is a specially formulated combination of additives and carrier fluid. In combination with the carrier fluid, the highly effective detergent and dispersant

additives dissolve sludge and lacquer formers. All types of oil-soluble and oilinsoluble

residues are brought into suspension and removed during the next oil change. An engine which has been cleaned of deposits and contamination and which is then filled with fresh oil not contaminated with old impurities can develop its full performance characteristics.

Properties

does not attack common sealing materials

- tested for turbochargers and catalytic converters

- highly economical

- protects the environment

- rapid cleaning

- suitable for diesel particulate filters

- gentle cleaning

- optimal engine performance

- simple to use

- minimizes wear

Areas of application

Cleaning and flushing out the oil circuits of gasoline and diesel engines. The use of Engine Flush is dependent on the degree of contamination of the oil circuit.

Not suitable for use on motorbikes with wet clutches.

Application

One 300 ml can is sufficient for up to 6 liters of oil.

Add Engine Flush to the motor oil at running temperature before changing the oil. After adding the product, allow the engine to idle for approx. 10 minutes. Then change the oil and the filter.

Engine Flush is compatible with all commercially available motor oils.

Technical data

Color / appearance gelb, braun / yellow, brown

Base Additiv, Trägerflüssigkeit / additive, carrier liquid

Density at 20 °C 0,81 g/cm³ DIN 51 757

Flash point 63 °C DIN ISO 2592

Pour point -45 °C DIN ISO 3016

Form flüssig / liquid

Viscosity at 40 °C <7 mm²/s

Odor charakteristisch / characteristic

2678