Qway M-10G2, 5L

Qway M-10G2

belongs to the category of motor oils that are obtained by mixing distillate and residual components. The resulting mixture is then treated with a complex of specialized additives that change the functional characteristics of the oil and make it possible to expand the scope of its application. GOST 8581-78 dictates special requirements for this type of oil. They must be hardened and meet the basic standards for the use of oils of this type. The additive complex is a reinforcing component that allows you to add new features to the lubricant.

Application of M-10G2 oil

M-10G2 is used in automotive and tractor diesel engines for agricultural and construction equipment. At the same time, the season for using this oil is summer, since it does not reveal its main capabilities in the colder period. Diesel engines that use this oil may have a slight boost, but generally their use is appropriate on engines that do not have it at all. This brand of oil is also widely used for lubricating high-speed stationary diesel engines and diesel generators. The nature of the use of this brand of oil means that it must meet special requirements - maintain temperature and resist the destruction of parts.

The product being sold meets all the basic requirements of GOST 8581-78 and is a high-quality and reliable lubricant.

Technical characteristics of M10G2

Density at 20°C, g/cub. cm, no more than 0.905

Kinematic viscosity, sq. mm/s at 100°C 10.5-11.5

Viscosity index, not less than 85

Mass fraction, %, no more:

mechanical impurities 0.015

water traces

Temperature, °C:

flashes in an open crucible, not lower than 205

hardening, not higher than -15

Corrosion on lead plates, g/sq. m, no more than 20

Cleaning properties according to ELV, points, no more than 1.0

Base number, mg KOH/g, not less than 6.0

Sulfate ash content, %, no more than 1.65

Stability according to the induction period of sedimentation (IPO) for: 40 hours withstands

Color on a CNT colorimeter with dilution in a ratio of 15:85, units. CNT, no more than 5.0

Mass fraction of active elements, %, not less:

calcium 0.15

zinc 0.06

phosphorus 0.06

Degree of purity, mg/100 g of oil, no more than 500