Tämä sivusto käyttää evästeitä. Sivuston selaaminen hyväksyt jatkuvan evästeiden käytön. Lisätiedöt

Motul 5100 4T 10W-30, 4L

2-5 Päivää Motul 5100 4T 10W-30, 4L

Ilmainen toimitus

Jos ostoksesi ylittää € 40,00, on kuljetus Viro sisällä meidän kustannuksellamme (Omniva ja SmartPOST). 

  • €45.05
  • Veroton: €36.92
Motul 5100 4T 10W-30
High performance lubricant for bikes
Technosynthese – Ester
TYPE OF USE
Street & road bikes, trails, off road bikes, enduro, trial…fitted with 4 stroke engines, integrated gearbox or not, wet or dry clutch, engines designed to run a low viscosity lubricant, engines meeting Euro 2 or Euro 3 emission regulation, fitted with exhaust gas after treatment systems : catalytic converters, air injection into exhaust pipe...
Other uses : street bikes without catalytic converters, scooters, ATV, mopeds...
PERFORMANCE
STANDARDS API SL / SJ / SH / SG
APPROVAL JASO MA under N° M033MOT054
Protection
Technosynthese lubricant reinforced by Ester base stock to warranty anti-wear properties and improve gear protection and life time.
Improved oil film resistance at high temperatures.
Grade 10W at cold temperature for a better anti wear protection of engine at cranking.
Grade 30 at hot temperature, may be used only when recommended by bike manufacturers.
Low Phosphorus and Sulphur content for better operating conditions of catalytic converters required for last emission regulation.
Comfort
JASO MA approved to warranty a perfect lock up of wet clutch.
Easy gear shifting.
RECOMMENDATIONS
Drain interval : according to manufacturers’ recommendations and tune to your own use.
Can be mixed with synthetic or mineral lubricants.
PROPERTIES
Viscosity grade SAE J 300 10W-30
Density at 20°C (68°F) ASTM D1298 0.871
Viscosity at 40°C (104°F) ASTM D445 75.0 mm²/s
Viscosity at 100°C (212°F) ASTM D445 11.8 mm²/s
Viscosity index ASTM D2270 152
Pour point ASTM D97 -39°C / -38°F
Flash point ASTM D92 226°C / 438°F
TBN ASTM D2896 8.2 mg KOH/g 

Kirjoita arvostelu

HUOM: HTML-koodia ei käännetä!
    Huono           Hyvä