Motul 5100 Ester 4T 10W-50, 1L
2-5 Päivää
Avaa galleria klikkaamalla
Ilmainen toimitus
Jos ostoksesi ylittää € 40,00, on kuljetus Viro sisällä meidän kustannuksellamme (Omniva ja SmartPOST).
- Katsottu: 4286
-
Näytä lisää tuotteita samalta valmistajalta
- Tuotenumero: SKU-16323
- Saatavuus: 2-5 Päivää
- €12.58
- Veroton: €10.31
Motul 5100 Ester 4T 10W-50
TYPE OF USE
Street & road bikes, trails, off road bikes, enduro, trial…fitted with 4 stroke engines, integrated gearbox or not, wet or dry clutch, engines meeting Euro 2 or Euro 3 emission regulation, fitted with exhaust gas after treatment systems : catalytic converters, air injection into exhaust pipe...
Other uses : street bikes without catalytic converters, scooters, ATV, mopeds...
PERFORMANCE
STANDARDS API SL / SJ / SH / SG
APPROVAL JASO MA under N° M033MOT056
Protection
Technosynthese lubricant reinforced by Ester base stock to warranty anti-wear properties and improve gear protection and life time.
Improved oil film resistance at high temperatures.
Grade 10W at cold temperature for a better anti wear protection of engine at cranking.
Grade 50 at hot temperature, specially designed for big bore engines, thumpers, twins, multicylinders…
Low Phosphorus and Sulphur content for better operating conditions of catalytic converters required to meet last emission regulation.
Comfort
JASO MA approved to warranty a perfect lock up of wet clutch.
Easy gear shifting.
RECOMMENDATIONS
Drain interval : according to manufacturers’ recommendations and tune to your own use.
Can be mixed with synthetic or mineral lubricants.
PROPERTIES
Viscosity grade SAE J 300 10W-50
Density at 20°C (68°F) ASTM D1298 0.873
Viscosity at 40°C (104°F) ASTM D445 118.3 mm²/s
Viscosity at 100°C (212°F) ASTM D445 17.73 mm²/s
Viscosity index ASTM D2270 168
Pour point ASTM D97 -39°C / - 38°F
Flash point ASTM D92 218°C / 424°F
TBN ASTM D2896 8.2 mg KOH/g