Motul Specific Dexos 2 5W-30, 1L

Motul Specific Dexos 2 5W-30

High performance 100% synthetic Fuel Economy Engine Oil exclusively designed for GM-OPEL engines requiring a lubricant approved dexos2TM by GENERAL MOTORS.

Universal engine oil for most GM-OPEL engines allowing at the same time outstanding lubrication (high HTHS >3.5 mPa.s) and real Fuel Economy performance.

Also suitable for any engine calling for API SM/CF or ACEA C3 lubricant.

Suitable for any type of fuel : gasoline, bio ethanol, diesel, biodiesel, LPG and CNG.

May be unsuitable for use in some engines. Before use, always check the owner manual or handbook.

PERFORMANCES

STANDARDS ACEA C3 - API SM / CF

APPROVALS GM-OPEL dexos2TM (replaces GM-LL-A-025 & GM-LL-B-025) under n° GB2A0107011.

Recent GM-OPEL engines compliant with EURO IV and EURO V emission regulations are fitted with very sensitive exhaust gas after treatment systems. Indeed, Sulfur and Phosphorus inhibit catalytic converters (CAT) operation leading to inefficient exhaust gas treatment; and Sulfated Ashes clog

Diesel Particulate Filters (DPF) leading to shorten regenerating cycle, quick oil aging, higher fuel consumption and engine power loss.

GM-OPEL for its dexos2TM norm requires oil to able to endure the most severe thermal constrains along with modern after treatment systems compatibility. Compare to the old GM-LL-A-025 & GM-LLB-

025 standards, this induced for the oil to be "Mid SAPS" formulated, with reduced contents of Sulfated Ash, Phosphorus and Sulphur, for longer preservation of after treatment systems such as CATs and DPFs. GM-OPEL has developed its dexos2TM standard in order for the oils to provide a high thermal stability and insure an outstanding resistance at high temperatures to avoid black sludge and viscosity increase that soot, coming from combustion residues, may create. dexos2TM standard is suitable for the whole range of GM-OPEL Diesel engines (including DPF versions) and most of Gasoline engines from Model Year 2010. Also, dexos2TM fully supersedes and

replaces the previous GM specifications : GM-LL-A-025 (Gasoline) and GM-LL-B-025 (Diesel).

MOTUL SPECIFIC dexos2TM 5W-30 meets all these highly demanding requirements of performance and durability set by GM-OPEL, including in particular for dexos2TM standard, the full compatibility to biofuels use such as LPG (Liquefied Petroleum Gas), CNG (Compressed Natural Gas), biodiesel (as available at the station) and bioethanol, when using bio ethanol at a mix ratio of up to 85% (Bioethanol – E85).

We retain the right to modify the general characteristics of our products in order to offer to our customers the latest technical development

Product specifications are definitive from the order which is subject to our general conditions of sale and warranty. Made in FRANCE

RECOMMENDATION

Drain interval : refer to manufacturers’ recommendations and tune to your own use.

Can be mixed with synthetic or mineral oils.

Before use always refer to the owner manual of the vehicle.

PROPERTIES

Viscosity grade SAE J 300 5W-30

Density at 20°C (68°F) ASTM D1298 0.850

Viscosity at 40°C (104°F) ASTM D445 69.6 mm²/s

Viscosity at 100°C (212°F) ASTM D445 12.0 mm²/s

Viscosity HTHS at 150°C (302°F) ASTM D4741 3.5 mPa.s

Viscosity index ASTM D2270 170

Pour point ASTM D97 -36°C / -32.8°F

Flash point ASTM D92 232°C / 449.6°F

Sulfated ash ASTM D874 0.78% weight

TBN ASTM D2896 7.4 mg KOH/g