Ravenol DXG 5W-30, 1L

is a full synthetic, low-friction engine oil with CleanSynto ® technology for car gasoline engines, with and without turbocharging and direct injection. Minimizes friction, wear and fuel consumption, and is suitable for extended oil drain intervals according to manufacturer's instructions. The oil formulation minimises the likelihood of Low-Speed Pre-Ignition (LSPI) of the fuel. It is recommended for turbocharged petrol engines with direct fuel injection (Turbo-GDI).

The excellent cold start performance ensures optimum lubrication during start-up, and as RAVENOL DXG SAE 5W-30 offers a significant fuel saving potential, the consequent reduction in emissions contributes to the protection of the environment.

Application Notes

RAVENOL DXG SAE 5W-30 is a high-performance low-friction engine oil for modern engines, and is approved by OPEL/GENERAL MOTORS to the latest GM dexos 1 specification for modern GM gasoline-engined vehicles under all operating conditions.

Quality Classifications

RAVENOL DXG SAE 5W-30 is approved, tried and tested for aggregates specifying:

Specifications

API SN (RC), ILSAC GF-5, API SN Resource Conserving, ILSAC GF-5

Approvals

GM dexos1 (License No. GB1C0601081), GMW 16181

Practice and tested in aggregates with filling

Ford WSS-M2C946-A, Ford WSS-M2C929-A, Chrysler MS-6395

Characteristic

RAVENOL DXGSAE 5W-30 offers:

Fuel savings potential underboth part and full load operation

A very stable viscosity behavior

An excellent shear stability

Very good cold starting properties

A safe lubricant film even at very high operating temperatures

Exceptional wear and corrosionprotection

Formulated to prevent foaming

Excellent detergent anddispersant capabilities for cleaner engines

Long service life throughhigh oxidation stability

Suitable for catalyst-equipped vehicles

Characteristics Unit Data Audit

Colour yellow brown visual

Density at 20°C kg/m³ 850 EN ISO 12185

Viscosity at 40°C mm²/s 57,8 DIN 51562

Viscosity at 100°C mm²/s 10,0 DIN 51 562

Viscosity index VI 161 DIN ISO 2909

CCS Viscosity at -30°C mPa*s 3990 ASTM D5293

Low Temp. Pumping viscosity -35°C (MRV) mPa*s 10.300 ASTM D 4684

Pourpoint °C -57 DIN ISO 3016

Noack Volatility % 7,9 ASTM D5800/a

Flash point (COC) °C 240 DIN ISO 2592

TBN mg KOH/g 8,3 DIN ISO 3771

Sulphated ash %wt. 0,87 DIN 51 575

HTHS Viscosity mPa*s 3,1 CEC L-36-A-97

1111124-004