Ravenol SSV Fuel Economy 0W-30, 1L

Ravenol SSV Fuel Economy 0W-30

is fully synthetic low friction multigrade engine oil based on PAO (Polyalphaolefine) with CleanSynto® technology for all petrol

and diesel passenger cars with and without turbo charger and direct injection.

Minimizes friction, wear and fuel consumption, excellent cold start characteristics and is suitable for extended oil drain intervals according to manufacturer's instructions.

RAVENOL SSV FUEL ECONOMY SAE 0W-30 has a high viscosity index because of its formulation with special base oils and PAO. The excellent cold start behaviour

provides an optimum lubricating safety during the cold run phase. Because of a considerable fuel saving RAVENOL SSV FUEL ECONOMY SAE 0W-30 contributes to

protect the environment by reducing the emissions.

Application Notes

RAVENOL SSV FUEL ECONOMY SAE 0W-30 is universal, fuel-efficient engine oil. It is a premium product for gasoline and diesel engine passenger cars. Suitable for all petrol and diesel passenger cars with and without turbo charger, especially recommended for full synthetic all-season motor oils.

Quality Classifications

Specifications

API SL, ACEA A5/B5

Approvals

VOLVO VCC 95200377

Characteristic

RAVENOL SSV FUEL ECONOMY SAE 0W-30 offers:

Universal application in all modern petrol and diesel engines quick lubrication of the engine even at temperatures below -30 °C low evaporation tendency, therefore a lower oil consumption safety against accumulation of sludge, coking and corrosion even under unfavourable operating conditions guarantee of the function of the hydro tappets at all temperatures no oil limited deposits in combustion chambers, at the piston ring and valves unchanged viscosity during the whole oil change interval, high viscosity index neutral against sealing materials

Miscibility with all commercially available engine oils. Flushing is not required.

Characteristics Unit Data Audit

Colour braun visual

Density at 20°C kg/m³ 838 EN ISO 12185

Viscosity at 40°C mm²/s 52,9 DIN 51 562

Viscosity at 100°C mm²/s 9,7 DIN 51 562

Viscosity index VI 172 DIN ISO 2909

CCS Viscosity at -35°C mPa*s 4610 ASTM D5293

Low Temp. Pumping viscosity (MRV) at-40°C mPa*s 16.300 ASTM D4684

Pourpoint °C -57 DIN ISO 3016

Noack Volatility % 8,1 ASTM D5800/b

Flash point (COC) °C 234 DIN ISO 2592

TBN mg KOH/g 10,0 ASTM D2896

Sulphated ash %wt. 1,2 DIN 51 575 HTHS at 150°C mP?*s 2,97 CEC L-36-A-97

1111145-001