Ravenol Super Fuel Economy SFE 5W-20, 1L

Ravenol Super Fuel Economy SFE 5W-20

is full synthetic, low-friction engine oil based on PAO (Polyalphaolefines) with CleanSynto® technology for car gasoline and diesel engines, with and without turbocharging and direct injection. Minimises friction, wear and fuel consumption with excellent cold start characteristics. Suitable for extended oil change intervals where recommended by manufacturer. The oil formulation minimises the likelihood of Low-Speed Pre-Ignition (LSPI) of the fuel. It is recommended for turbocharged petrol engines with direct fuel injection (Turbo-GDI).

RAVENOL Super Fuel Economy SFE SAE 5W-20 has a high viscosity index because of its formulation with special base oils. The excellent cold start behaviour provides an

optimum lubricating safety during the cold run phase. Because of a considerable fuel saving RAVENOL Super Fuel Economy SFE SAE 5W-20 contributes to protect the

environment by reducing the emissions.

Application Notes

RAVENOL SFE 5W-20 is an universal fuel-efficient engine oil, a top-quality product for modern passenger cars with gasoline engines of the latest generation.

Quality Classifications

Specifications

API SN (RC), ILSAC GF-5, ACEA A5/B5, Lizensiert: API SN Resource Conserving, ILSAC GF-5

Approvals

Jaguar Land Rover STJLR.03.5004

Practice and tested in aggregates with filling

Meets FORD WSS-M2C930-A, FORD WSS-M2C930-B (extended drain capability), Ford WSS-M2C925-A/B, Ford WSS-M2C948-B, Chrysler MS-6395, Nissan, MAZDA,

Suzuki, Toyota, Fiat 9.55535-CR1, Honda/Acura HTO-6

Characteristic

RAVENOL Super Fuel Economy SFE SAE 5W-20 offers:

Guaranteed fastest possible lubrication of the engine.

High fuel economy (FE) effect due to the base oils and additives used. Low volatilization tendency, thereby lower oil consumption.

Provides protection against sludging, coking, varnish and corrosion even under unfavorable operating conditions.

No oil-related deposits in combustion chambers in the piston ring zone and on valves.

Ensures the function of the hydraulic tappets at all temperatures.

Stable engine oil, no NOx oxidation.

Good aging behavior, confirmed by the Hot Tube Test.

Good soot absorption and dispersion.

Neutral towards sealing materials.

Protectsturbocharger, EPS and engines running with ethanol-containing fuels up to E85.

Compatibilitywith exhaust gas after treatment systems.

Characteristics Unit Data Audit

Colour brown visual

Density at 20°C kg/m³ 843,0 EN ISO 12185

Viscosity at 40°C mm²/s 47,2 DIN 51 562

Viscosity at 100°C mm²/s 8,5 DIN 51 562

Viscosity index VI 160 DIN ISO 2909 CCS Viscosity at -30°C mPa*s 3640 ASTM D5293

Low Temp. Pumping viscosity (MRV) at -40°C mPa*s 6.700 ASTM D4684

Pourpoint °C -63 DIN ISO 3016

Noack Volatility % 8,3 ASTM D5800/b

Flash point (COC) °C 238 DIN ISO 2592

TBN mg KOH/g 8,8 ASTM D2896

Sulphated ash %wt. 1,07 DIN 51 575 HTHS at 150°C mP?*s 2,85 CEC L-036-90

1111110-001